www.megadrum.info

Posted: **Thu May 13, 2010 4:08 am**

Willl this Display work? This one has an option to connect only 14 wires but the one in the circuit has 16. :roll:

Posted: **Thu May 13, 2010 5:16 am**

Found the answer.. will need to check if this works though

. "Dont connect pin 15 qand pin 16 from the Megadrum board"
http://www.edaboard.com/ftopic144244.html
This might help help someone.

Posted: **Thu May 13, 2010 10:19 am**

Right, that LCD doesn't have backlighting. pin 15 and 16 are for the backlight led power.

Posted: **Thu May 13, 2010 10:51 am**

I had a similar display to that one and it also had 14 pins, but I found that the missing 2 pins were those pads on the left, as shown here:

Display.JPG

It's worth a try anyway, because a display without a backlight is a bit hard on your eyes...

Posted: **Mon Jun 14, 2010 4:34 am**

It did not work.. I guess it is not a backlit display. Will purchase a backlit one soon. Thanks anyway

Display